Den basiske opløsning til pneumatisk limpistol lækageluft

1) Inlet air leakage: The connection degree between the air pump and the glue gun air inlet is not enough. You can choose to change the joint or connect the air pipe to the air inlet of the glue gun and fix it with wire.

2) Leakage of the gun body: The screw can be removed, reinstalled, and tightened. Or seal it with glass glue, serious air leakage, please contact the supplier to replace the gun body.

3) Leakage at the front of the barrel: The glue is too long, causing the front cover not to tighten. Or its front cover is screwed into place.

4) Air leakage at the rear end of the gun: Damage to the seal or damage to the rear muffler. Contact your supplier for replacement.